Joakim Larsson
Position: Laboratory Engineer School/office: School of Science and TechnologyEmail: am9ha2ltLmxhcnNzb247b3J1LnNl
Phone: +46 19 303378
Room: T1234
Research subject
Research projects
Active projects
Completed projects
Research groups
Publications
Articles in journals |
Conference papers |
Doctoral theses, comprehensive summaries |
Manuscripts |
Articles in journals
- Lin, Z. , Dadbakhsh, S. , Larsson, J. , Karlsson, P. & Rashid, A. (2024). A Systematic Approach to Optimize Parameters in Manufacturing Complex Lattice Structures of NiTi Using Electron Beam Powder Bed Fusion Process. Advanced Engineering Materials, 26 (10). [BibTeX]
- Larsson, J. , Karlsson, P. & Pejryd, L. (2020). The effect of bearing length on the surface quality of drawn wires. Wire Journal International, 53 (2), 50-55. [BibTeX]
- Zekavat, A. R. , Jansson, A. , Larsson, J. & Pejryd, L. (2019). Investigating the effect of fabrication temperature on mechanical properties of fused deposition modelling parts using X-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 100 (1-4), 287-296. [BibTeX]
- Larsson, J. , Jansson, A. & Karlsson, P. (2019). Monitoring and evaluation of the wire drawing process using thermal imaging. The International Journal of Advanced Manufacturing Technology, 101 (5-8), 2121-2134. [BibTeX]
- El-Amine, K. , Larsson, J. & Pejryd, L. (2018). Experimental comparison of roller die and conventional wire drawing. Journal of Materials Processing Technology, 257, 7-14. [BibTeX]
- Larsson, J. , Jansson, A. & Pejryd, L. (2017). Process monitoring of the wire drawing process using a web camera based vision system. Journal of Materials Processing Technology, 249, 512-521. [BibTeX]
- Pejryd, L. , Larsson, J. & Olsson, M. (2017). Process monitoring of wire drawing using vibration sensoring. CIRP - Journal of Manufacturing Science and Technology, 18, 65-74. [BibTeX]
- Larsson, J. , Johansson-Cider, H. & Jarl, M. (2014). Temperatures in the wiredrawing process: Measurements and simulations. Wire Journal International, 47 (2), 128-133. [BibTeX]
Conference papers
- Larsson, J. (2023). Improving cooling in tooling – Case studies from the wire drawing process. Paper presented at Wire & Cable Conference Milan, Milano, Italy, October 16, 2023. (pp. 73-82). The Wire Association International (WAI). [BibTeX]
- Larsson, J. , Karlsson, P. & Jansson, A. (2023). In-situ evaluation of the performance of wire drawing using multiple sensors. In: Interwire 2023. Paper presented at Wire Association International 93rd Annual Convention (Interwire 2023), Atlanta, USA, May 9-11, 2023. (pp. 3-14). [BibTeX]
- Larsson, J. , Lindström, P. , Korin, C. , Ekengren, J. & Karlsson, P. (2023). The Influence of Nozzle Size on the Printing Process and the Mechanical Properties of FFF-Printed Parts. In: Christoph Klahn; Mirko Meboldt; Julian Ferchow, Industrializing Additive Manufacturing Proceedings of AMPA2023. Paper presented at International Conference on Additive Manufacturing in Products and Applications (AMPA 2023),. (pp. 159-170). Springer. [BibTeX]
- Larsson, J. , Chetroiu, B. & Enghag, E. (2022). Additively manufactured conformal cooling tool holder for wire drawing utilizing triply periodic minimal surfaces. In: 12th Tooling Conference & Exhibition Proceedings. Paper presented at 12th Tooling Conference & Exhibition (TOOling 2022), Örebro, Sweden, April 25-27, 2022. (pp. 22-29). [BibTeX]
- Larsson, J. , Garmendia Alustiza, S. , Otegi, N. & Karlsson, P. (2022). Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides. In: Metal Additive Manufacturing Conference Proceedings. Paper presented at Metal Additive Manufacturing Conference (MAMC 2022), Graz, Austria, September 26-28, 2022. (pp. 225-235). [BibTeX]
- Surreddi, K. B. , Larsson, J. & Olsson, M. (2022). Investigating the surface degradation and wear mechanisms of uncoated and PVD-coated cemented carbide dies in steel wire drawing. In: 12th Tooling Conference & Exhibition Proceedings. Paper presented at 12th Tooling Conference & Exhibition (TOOling 2022), Örebro, Sweden, April 25-27, 2022. (pp. 523-530). [BibTeX]
- Larsson, J. , Karlsson, P. , Ekengren, J. & Pejryd, L. (2021). Enhanced Cooling Design in Wire Drawing Tooling Using Additive Manufacturing. In: Mirko Meboldt, Christoph Klahn, Industrializing Additive Manufacturing Proceedings of AMPA2020. Paper presented at The 2nd International Conference on Additive Manufacturing for Products and Applications (AMPA 2020), Zürich, Switzerland, September 1-3, 2020. (pp. 426-436). Springer, Cham. [BibTeX]
- Larsson, J. (2019). Digitalisering i tråddragningsindustrin. Paper presented at Nordisk trådteknisk förening (NTTF), Årsmöteskonferens, Loka, Sweden, September 19-20, 2019. (pp. 66-72). Linköping: NTTF. [BibTeX]
- Larsson, J. , Karlsson, P. & Pejryd, L. (2019). The effect of bearing length on the surface quality of drawn wire. Paper presented at 89th Annual Convention of the Wire Association International, Atlanta, USA, May 13-16, 2019. [BibTeX]
- Larsson, J. , Jansson, A. & Pejryd, L. (2019). Wire 4.0. Paper presented at Wire & Cable, Verona, Italia, 21-22 October 2019. (pp. 185-198). [BibTeX]
- Pejryd, L. & Larsson, J. (2018). Additively manufactured tool holder for wire drawing processes. In: Euro PM 2018 Congress and Exhibition. Paper presented at Europe's Annual Powder Metallurgy Congress and Exhibition (EURO PM2018), Bilbao, Spain, October 14-18, 2018. EPMA. [BibTeX]
- Larsson, J. (2016). Vibrationsmätning som processövervakning i tråddragningsprocessen. Paper presented at Nordisk trådteknisk förening (NTTF), Årsmöteskonferens, Åbo, Finland, September 22-23, 2016. (pp. 53-59). Hallstahammar: Nordisk trådteknisk förening (NTTF). [BibTeX]
- Larsson, J. & Pejryd, L. (2015). Preliminära resultat från jämförelse mellan konventionell dragning och dragning med Roller Dies. Paper presented at Nordisk trådteknisk förening (NTTF), Årsmöteskonferens, Ed, Sweden, September 24-25, 2015. (pp. 103-111). Linköping: [BibTeX]
- Larsson, J. , Johansson-Cider, H. & Jarl, M. (2013). Monitoring of the wiredrawing process. In: Wire Association International Annual Convention. Paper presented at Wire Association International, 83rd Annual Convention, Atlanta, 22-25/4 2013. [BibTeX]
- Larsson, J. , Johansson-Cider, H. & Jarl, M. (2013). Temperatures in the Wire Drawing Process: Measurements and Simulations. In: Wire Association International Annual Convention. Paper presented at Wire Association International, 83rd Annual Convention, Atlanta, 22-25/4 2013. [BibTeX]
- Larsson, J. & Jarl, M. (2012). Högre draghastighet. In: Nordisk trådteknisk förening Årsmötesbok. Paper presented at Nordisk trådteknisk förening, Årsmöteskonferns, Hagen, 18-19/9 2012. (pp. 63-70). Örebro: Nordisk trådteknisk förening (NTTF). [BibTeX]
- Larsson, J. & Jarl, M. (2011). Teknik för högre draghastigheter: tempearturens inverkan. In: Nordisk trådteknisk förening årsmötesbok. Paper presented at Nordisk trådteknisk förening, Årsmöteskonferns, Sundsvall, 15-16/9 2011. (pp. 53-60). Hallstahammar: Nordisk trådteknisk förening (NTTF). [BibTeX]
Doctoral theses, comprehensive summaries
- Larsson, J. (2024). Have you heard about wire? Monitoring of the wire drawing process. (Doctoral dissertation). (Comprehensive summary) Örebro: Örebro University. [BibTeX]
Manuscripts
- Larsson, J. , Pettersson, R. & Korin, C. Experimental and theoretical examination and development of methods to calculate required pull force in wire drawing. [BibTeX]