This page in Swedish

Camilla Persson

Position: Senior Lecturer School/office: School of Science and Technology

Email: Y2FtaWxsYS5wZXJzc29uO29ydS5zZQ==

Phone: +46 19 303633

Room: T2262

Research subject

Mechanical Engineering

About Camilla Persson

As a lecturer in Building Technology Camilla Persson conducts teaching in building physics, building materials, building technology, mathematical modelling, sustainable development and life cycle assessments.

These areas also include her research interests.

In present research Camilla studies among other things the mechanical interaction between materials and a finger like sensor. The idea behind the research is to increase understanding of how material, geometry and manufacturing influences the resulting interaction and to communicate this in the product chain coupled to measurable physical parameters to enable optimizations towards better customization and use.

In previous research Camilla has studied heat losses and environmental impact from district heat distribution and construction of piping systems and insulation materials to decrease heat losses.

Research projects
Publications

Active projects

Mechanical interaction between an anisotropic sandwich material and a tactile sensor

Publications

Articles in journals | Conference papers | Manuscripts | Reports |

Articles in journals

Persson, C. , Eriksson, H. & Korin, C. (2023). The influence of creases on carton board package behavior during point loading. Nordic Pulp & Paper Research Journal, 38 (3), 491-499. [BibTeX]
Eriksson, D. , Persson, C. , Ericsson, H. , Käck, T. & Korin, C. (2021). Laboratory measurement method for the mechanical interaction between a tactile sensor and a cartonboard package – presentation and evaluation. Nordic Pulp & Paper Research Journal, 36 (1), 91-99. [BibTeX]
Eriksson, D. , Gerald E., L. , Persson, C. & Korin, C. (2020). Evaluating the use of a tactile sensor for measuring carton compliance. Nordic Pulp & Paper Research Journal, 35 (3), 362-369. [BibTeX]
Persson, C. , Fröling, M. & Svanström, M. (2006). Life cycle assessment of the district heat distribution system - Part 3: Use phase and overall discussion. The International Journal of Life Cycle Assessment, 11 (6), 437-446. [BibTeX]
Mangs, S. , Ramnäs, O. J. , Persson, C. , Jarfelt, U. & Fröling, M. (2006). PET and PUR foam insulated District Heating Pipes – Study: Environmental Comparison. Euroheat & Power, 3 (1), 26-31. [BibTeX]
Fröling, M. , Persson, C. & Svanström, M. (2004). Life cycle assessment of the district heat distribution system - Part 1: Pipe production. The International Journal of Life Cycle Assessment, 9 (2), 130-136. [BibTeX]

Conference papers

Persson, C. , Eriksson, D. , Ericsson, H. & Korin, C. (2022). Mechanical interaction between a cartonboard package and a tactile sensor depending on position and material. In: Proceedings of 17th Fundamental Research Symposium, Cambridge, August/September 2022. Paper presented at 17th Fundamental Research Symposium, Cambridge, UK, August 29 - September 1, 2022. FRC. [BibTeX]
Persson, C. & Claesson, J. (2008). Prediction of heat losses from district heating twin pipes. Paper presented at 11th International Symposium on District Heating and Cooling, Reykjavik, Iceland, August 31 - September 2, 2008. [BibTeX]
Persson, C. & Claesson, J. (2008). Prediction of the long-term insulating capacity of cyclopentane-blown polyurethane foam. Paper presented at The 8th Nordic Symposium on Building Physics, Copenhagen, Denmark, June 16-18, 2008. [BibTeX]
Persson, C. , Jarfelt, U. & Ramnäs, O. J. (2008). Solubility of cyclopentane in PUR-foam and implications for district heating pipes. Paper presented at 11th International Symposium on District Heating and Cooling, Reykjavik, Iceland, August 31 - September 2, 2008. [BibTeX]
Persson, C. , Reidhav, C. , Jarfelt, U. & Ramnäs, O. J. (2006). Insulating performance of flexible pipes. Paper presented at 10th International Symposium on District Heating and Cooling, Hannover, Germany, September 3-5, 2006. [BibTeX]
Persson, C. & Claesson, J. (2005). Multipole Method to Compute Heat Losses from District Heating Pipes. Paper presented at The 7th Nordic Symposium on Building Physics, Reykjavik, Iceland, June 13-15, 2005. [BibTeX]
Claesson, C. , Persson, C. , Jarfelt, U. & Ramnäs, O. J. (2004). A new method of laying district heating pipes. Paper presented at The 9th International Symposium on District Heating & Cooling, Helsingfors, Finland, August 30-31, 2004. [BibTeX]
Jarfelt, U. , Persson, C. , Forsaeus Nilsson, S. , Ramnäs, O. J. & Mangs, S. (2002). Comparison of Long-Term Thermal Performance of Polyurethane Foam Blown with HFC-365mfc and Cyclopentane. Paper presented at Polyurethanes Conference 2002, Salt Lake City, USA, October 13-16, 2002. [BibTeX]
Fröling, M. , Mangs, S. , Ramnäs, O. J. , Persson, C. & Jarfelt, U. (2002). Environmental aspects on heat losses from district heating pipes: a comparison between single and twin pipes. Paper presented at 8th International Symposium on District Heating and Cooling, Trondheim, Norway, August 14-16, 2002. [BibTeX]
Fröling, M. , Svanström, M. & Persson, C. (2002). Life Cycle Performance of District Heating Distribution Networks. Paper presented at 8th International Symposium on District Heating and Cooling, Trondheim, Norway, August 14-16, 2002. [BibTeX]

Manuscripts

Eriksson, D. , Eriksson, H. , Persson, C. & Korin, C. Mechanical interaction between a cartonboard package and a tactile sensor depending on position and material. [BibTeX]

Reports

Persson, C. & Claesson, J. (2005). Heat loss from a district heating pipe: coupled radial heat conduction and diffusion through the polyurethane foam insulation.. (Report, Division of Building Technology/Building Physics, Chalmers University of Technology 2005:14). [BibTeX]
Claesson, J. & Persson, C. (2005). Steady-state thermal problem of insulated pipes solved with the multipole method. Göteborg: Chalmers tekniska högskola (Report (Department of Civil and Environmental Engineering, Chalmers University of Technology), 1652-9162 ; 2005:3 2005:3). [BibTeX]
Jarfelt, U. , Ramnäs, O. , Persson, C. & Claesson, C. (2004). Flexibla fjärrvärmerörs isoleringsegenskaper.. Svensk Fjärrvärme AB (Forskning och Utveckling 2004:117). [BibTeX]
Persson, C. & Fröling, M. (2002). Miljöbelastning från produktion av fjärrvärmerör. Stockholm: Svenska fjärrvärmeföreningens service (Svenska fjärrvärmeföreningens FOU-rapport 2002:82). [BibTeX]